PROtect 49er Kit

PROtect Tapes
$450.00 (excl. tax) $495.00 (incl. tax)
Be the first to leave a review
PROtect tapes 49er kit designed and optimized by the Australian champions Nathan Outteridge and Iain Jensen.

The kit contains twenty eight different pieces already die cut, easy to apply just removing the liner and one roll of tapes to improve the performance and reliability of the skiff designed by Julian Bethwaite. Just a couple of examples: PTFE tapes to be applied inside the throat to make easier to hoist and drop the kite or to minimize the friction inside the pole launcher. UHMWPE to eliminate the gap on rudder stock or avoid friction/abrasion of the pole on deck.
PMK049 contains the following items:
PCT125 51 mm x 0.2m 2 pieces Pole Launcher
PML125 100 mm x 0.4m 2 pieces Inside kite throat
PCT500 51 mm x 3.0m 1 piece Deck for Pole
PCT500 25 mm x 0,05m 2 pieces Strip in front of Foot Straps
PCT076 25 mm x 0,05m 2 pieces Control Line Holes
PCT076 25 mm x 0,05m 2 pieces Trapeze Shockcord Holes
PCT076 51 mm x 1m 2 pieces Side of Mast Step for Jib Sheet
PCT500 51 mm x 0,05m 1 piece Mainsheet Ratchet Block
PCT250 51 mm x 0,05m 1 piece Boom for Out Haul
PML125 25 mm x 0,1m 2 pieces Vang Top
PML125 25 mm x 0,1m 2 pieces Vang Bottom
PCT125 25 mm x 1m 1 piece Rudder Stock
PCT250 25 mm x 1m 1 piece Rudder Stock
PCT500 25 mm x 1m 1 piece Rudder Stock
PML050 51 mm x 0.3m 4 pieces Spreaders
PML050 12 mm x 33m 1 roll To Cover Tip Bolts, Spreader Tips, To cover T Balls and Turnbuckles
PMH250 51 mm x 2.0m 1 piece Jib Luff