Quick View Compare CST Composites Moth Heel Plug (Male) - Tow Pro Series $154.00 (Ex. Tax) $169.40 (Inc. Tax) Male heel plug for Tow Pro series Moth masts. All aluminium design to prevent bending of the pin under vang load. Add to Cart
Quick View Compare North Sails Moth Cam INDIVIUAL CAM $72.73 (Ex. Tax) $80.00 (Inc. Tax) Exclusive to SAILINGBITS North Sail Moth Batten Cams Upgrade your existing 3D printed cams - Stronger - Lighter - Improved Rotation From the Top 60mm (Cam 1) 90mm (Cam 2) 110mm (Cam 3-5) 90mm (Cam 6) For longer... Pick Options
Quick View Compare M2.6 Gearing Assembly Kit $386.36 (Ex. Tax) $425.00 (Inc. Tax) THE KIT CONTAINS - BOLTS & MACH2.4 PARTS Qty Part Number Descriptiom 2 M24GDMX Gearing Deck Mount Assembly 1 M24GJX Gearing Joiner Assembly 4 BO3X16CSP M3x16mm Countersunk Phillips 1 M24GBCCX2 Mach2.4 Bowsprit Bellcrank Cap Assembly... Add to Cart
Quick View Compare SB Moth Cam Chafe Tape $19.55 (Ex. Tax) $21.50 (Inc. Tax) Sailingbits Moth CAM Chafe tape is durable and hard wearing. Perfect to protect you mast and cams - Includes full set for 6 cams - Pre cut to fit most cam profiles - over 50% cheaper than other products on the market - strong adhesive... Add to Cart
Quick View Compare M2.6 RHA Rear Connector Insert $31.82 (Ex. Tax) $35.00 (Inc. Tax) Mach2.6 RHA Rear Connector Insert Add to Cart
Quick View Compare M2.6 RHA Front Connector Insert $30.00 (Ex. Tax) $33.00 (Inc. Tax) Mach2.6 RHA Front Connector Insert Add to Cart
Quick View Compare M2.6 Bellcrank $113.64 (Ex. Tax) $125.00 (Inc. Tax) Bellcrank with 4 mm axle hole - does not need bushing Add to Cart
Quick View Compare M2.6 Ride Height Adj Barrel Assembly $254.55 (Ex. Tax) $280.00 (Inc. Tax) Mach2.6 Ride Height Adjuster Barrel Assembly Add to Cart
Quick View Compare M2.6 RHA Front Connector $67.27 (Ex. Tax) $74.00 (Inc. Tax) Mach2.6 RHA Front Connector Add to Cart
Quick View Compare Copy of M2.6 Utility Tube $104.55 (Ex. Tax) $115.00 (Inc. Tax) Mach2.6 Utility Tube, Approx .9 m long Add to Cart
Quick View Compare M2.6 Hull Pullrod Tube $163.64 (Ex. Tax) $180.00 (Inc. Tax) Mach2.6 Hull Pullrod Tube 100% Carbon, Approx 1.1 m long Add to Cart
Quick View Compare M2.6 Hull Pullrod Joiner Tube $33.64 (Ex. Tax) $37.00 (Inc. Tax) Mach2.6 Hull Pullrod Tube Joiner 100% Carbon Add to Cart
Quick View Compare M2.6 Reversing Lever Cavity $290.91 (Ex. Tax) $320.00 (Inc. Tax) Mach2.6 Deck Cavity for Reversing Lever Add to Cart
Quick View Compare M2.6 Bowsprit Holder Tube $83.64 (Ex. Tax) $92.00 (Inc. Tax) Mach2.6 Bowsprit Holder Tube - 100% Carbon Add to Cart
Quick View Compare M2.6 Bowsprit Pullrod $78.18 (Ex. Tax) $86.00 (Inc. Tax) Mach2.6 Bowsprit Pullrod Add to Cart
Quick View Compare M2.6 Reversing Lever Bearing $172.73 (Ex. Tax) $190.00 (Inc. Tax) Mach2.6 Reversing Lever Axle Bearing (Pair) Add to Cart
Quick View Compare M2.6 Reversing Lever Axle $15.91 (Ex. Tax) $17.50 (Inc. Tax) Mach2.6 Reversing Lever Axle Add to Cart
Quick View Compare M2.6 Reversing Lever $49.09 (Ex. Tax) $54.00 (Inc. Tax) Mach2.6 Reversing Lever Add to Cart
Quick View Compare M2.6 Pullrod Slider Casing Nut $24.55 (Ex. Tax) $27.00 (Inc. Tax) Mach2.6 Pullrod Slider Casing Nut Add to Cart
Quick View Compare M2.6 Pullrod Slider Casing $195.45 (Ex. Tax) $215.00 (Inc. Tax) Mach2.6 Control Slider Casing Add to Cart
Quick View Compare M2.6 Pullrod Slider $34.55 (Ex. Tax) $38.00 (Inc. Tax) Mach2.6 Pullrod Slider Add to Cart
Quick View Compare M2.6 Hull Pull Rod Rear Connector $49.09 (Ex. Tax) $54.00 (Inc. Tax) Mach2.6 Hull Pullrod Rear Connector Add to Cart
Quick View Compare M2.6 Hull Push Rod $49.09 (Ex. Tax) $54.00 (Inc. Tax) Mach2.6 Hull Pull Rod Add to Cart
Quick View Compare M2.6 Bowsprit Pull Rod Rear Connector $30.00 (Ex. Tax) $33.00 (Inc. Tax) Mach2.6 Bowsprit Pullrod Adjuster Add to Cart
Quick View Compare M2.4 Deck Organiser $74.55 (Ex. Tax) $82.00 (Inc. Tax) Organizer for return of continuous control lines and leads for other controls. CNC'd 6061 Anodised Alloy. Two required per boat. Price is for one. Add to Cart
Quick View Compare M2.4 Cleat Plate $518.18 (Ex. Tax) $570.00 (Inc. Tax) Pair of Cleat Plates to be bonded to wing bars. The cleat plates allow a boat to be upgraded to the Mach2.4 fitting configuration. This part is required to be bonded to the outer wing bars. Adhesive is required for bonding and is not included. Fittings... Add to Cart
Quick View Compare M2.4 Bowsprit Pull Rod Rear Connector V2 $52.73 (Ex. Tax) $58.00 (Inc. Tax) Mach2.4 Bowsprit Pull Rod Rear Connector V2 For use with the new 5mm pull rod. Add to Cart
Quick View Compare M2.41 Bowsprit Pull Rod V2 $67.27 (Ex. Tax) $74.00 (Inc. Tax) Mach2.41 Bowsprit Pull Rod Version 2 Now 5mm and incorporates the front terminal. Can only be used with other 2.41 parts (Carbon front and wand top, rear terminal). Add to Cart
Quick View Compare M2.41 Front Horizontal Cover $69.09 (Ex. Tax) $76.00 (Inc. Tax) Mach2.41 Front Horizontal Cover Add to Cart
Quick View Compare M2.4 Rudder Vertical Cover $69.09 (Ex. Tax) $76.00 (Inc. Tax) Mach2.4 Rear Vertical Cover Add to Cart
Quick View Compare M2.4 & 2.5 Wing Cover Bladder Set $70.91 (Ex. Tax) $78.00 (Inc. Tax) Mach2 Wing Cover Bladder Set for Mach 2.4 & 2.5 Tramps White PVC material with nipples laminated in to eliminate glue failure. Add to Cart
Quick View Compare M2 Batten Adjuster Grub Screw $4.36 (Ex. Tax) $4.80 (Inc. Tax) Batten Adjuster Grub Screw M10x16 316SS Add to Cart
Quick View Compare M2.5 Mast Stump $254.55 (Ex. Tax) $280.00 (Inc. Tax) Mach 2.5 Mast Stump for Mach2.5 Front Wing Bars. Does not have top strut holes for Mach 2 or Mach 2.3 Front Wing Bars. Also 15mm shorter than the 2.3 at 220mm. Add to Cart
Quick View Compare M2.3 Low Mast Stump $254.55 (Ex. Tax) $280.00 (Inc. Tax) Mach2.3 Mast Stump for Mach2.3 Front Wing Bars (not compatible with Regular Mach2 Front Wing Bars) Holes for the top struts are 50mm lower but mast step is same as 2.0. Use std stump cut at bottom if you want to lower rig. Mach2.3 Mast Stump for... Add to Cart
Quick View Compare M2.5 Front Wing Bar Socket Right $313.64 (Ex. Tax) $345.00 (Inc. Tax) Autoclaved pre-preg carbon fibre For reinforcing the wing sockets for no compression bars. Requires carbon tow Add to Cart
Quick View Compare M2.5 Front Wing Bar Socket Left $313.64 (Ex. Tax) $345.00 (Inc. Tax) Autoclaved pre-preg carbon fibre For reinforcing the wing sockets for no compression bars. Requires carbon tow Add to Cart
Quick View Compare M2.3 RHA Front Connector Insert $21.82 (Ex. Tax) $24.00 (Inc. Tax) Mach2.3 RHA Front Connector Insert Add to Cart
Quick View Compare M2 Control Link Pin 3x8mm $19.09 (Ex. Tax) $21.00 (Inc. Tax) Special build for Mach2 Wand Adjuster Nut. 3mm diam 8.5 mm shank (comes with 2 cir clips) Add to Cart
Quick View Compare M2 Control Link Pin 3x6mm $19.09 (Ex. Tax) $21.00 (Inc. Tax) Special build for Mach2 Control Cable Sliders. 3mm diam 6.5 mm shank (comes with 2 cir clips) Add to Cart
Quick View Compare M2 Lower Gantry Nut $19.09 (Ex. Tax) $21.00 (Inc. Tax) Mach2 Internal lower gantry nut Add to Cart
Quick View Compare M2 Gantry Washer $15.91 (Ex. Tax) $17.50 (Inc. Tax) Mach2 Gantry Washer Add to Cart
Quick View Compare M2.4 Front Foil Push Rod L (134cm) $58.18 (Ex. Tax) $64.00 (Inc. Tax) Only fitted for the longer 2.4 front vertical, made from high tensile SS specially made for us in the USA. Approx 134cm x 2mm (M2 thread) Add to Cart
Quick View Compare SB Custom Moth Cams $66.36 (Ex. Tax) $73.00 (Inc. Tax) Custom Length Moth Cams - No need for cam spacers - Add your length in MM - Have the perfect cam for your sail LEAD TIME FOR CUSTOM CAMS CAN BE BETWEEN 1 - 2 WEEKS FOR MANUFACTURING Pick Options
Quick View Compare SB Chafe Tape $5.91 (Ex. Tax) $6.50 (Inc. Tax) Sailingbits Chafe tape is durable and hard wearing. Perfect to protect your boat and equipment - Standard 1.3m lengths - 50mm thick (can request custom thickness if required) - over 50% cheaper than other products on the market - strong adhesive... Add to Cart
Quick View Compare Bieker Main Foil Bolt (wing bolt) $5.64 (Ex. Tax) $6.20 (Inc. Tax) Bieker Main Foil Bolt (wing bolt) 5mm Dia 15mm thread Add to Cart
Quick View Compare SB UNIVERSAL JOINT $36.36 (Ex. Tax) $40.00 (Inc. Tax) Tired of the tiller falling off the back of the wing bars? Looking for a stiff and positive connection to your tiller ...... THIS IS THE SOLUTION ! Don't let the colour fool you, they are all the same grade of material. The SailingBits Universal... Pick Options
Quick View Compare Ronstan Bridle Pulley $10.65 (Ex. Tax) $11.72 (Inc. Tax) FEATURES Lightweight durable construction Economical Maintenance free Sheave Ø 16 mm Max. Rope Ø 4 mm Max. Cable Ø - mm Pin Ø - mm M.W.L. 150 kg B. L. 300 kg Weight 5 g Pick Options
Quick View Compare CST Composites Moth Spreader Fitting $102.19 (Ex. Tax) $112.41 (Inc. Tax) Spreader attachment fitting for 35mm mast Add to Cart
Quick View Compare CST Composites Moth Gooseneck $78.65 (Ex. Tax) $86.52 (Inc. Tax) Tested and proven to work! This is the best little trick upgrade you will make to your boat. A nice smooth fitting for the cunno rope to pass through and adds a little extra length to your boom for those growing sails. 35mm mast, Fits boom with internal... Add to Cart
Quick View Compare BUGS Torque Steer uni $54.55 (Ex. Tax) $60.00 (Inc. Tax) This is the perfect addition to your moths tiller. No need to replace your flex joint again. Long lasting No torsional twisting stiff joint through to the tiller Tiller Internal Adjusting rod end - ID 10mm Tiller EXTENSION end - OD 20mm... Add to Cart
Quick View Compare M2 Carbon Gooseneck $300.00 (Ex. Tax) $330.00 (Inc. Tax) Fitting on mast to attach boom. Quick attach / detach. Bolt stays permanently on boom, just clips on. Vang pressure holds it there. Does not work with downhaul cascades inside boom. SAVE YOUR BOAT FROM SERIOUS DAMAGE IF YOU DROP YOUR RIG. The boom... Add to Cart
Quick View Compare Carbonix Bow Sprit Wand Holder $139.86 (Ex. Tax) $153.85 (Inc. Tax) Replacement Wand holder for Carbonix Bowsprit Add to Cart
Quick View Compare Carbonix Bow Sprit bearing $104.89 (Ex. Tax) $115.38 (Inc. Tax) Replacement bearings for Carbonix Bowsprit SOLD INDIVIDUALLY Add to Cart
Quick View Compare Moth Mast Gooseneck $115.00 (Ex. Tax) $126.50 (Inc. Tax) MAST GOOSENECK Carbon Mast Gooeneck, bonds to back of mast and prevents the boom pin splitting the mast apart under high vang loads. No failiures to date, very light, strong and ready to fit. Center of mast to center of boom pin = 40mm. Max Pin... Add to Cart
Quick View Compare M2.4 Bent Boom Insert $490.91 (Ex. Tax) $540.00 (Inc. Tax) To convert a Mach2.2 boom to a bent 2.4 boom Add to Cart
Quick View Compare M2.4 Bowsprit Fron V2 $322.73 (Ex. Tax) $355.00 (Inc. Tax) Mach2.4 Bowsprit Front V2, Carbon To be used with with the carbon wand top Add to Cart
Quick View Compare M2.4 IGUS bushing For Bellcrank $6.18 (Ex. Tax) $6.80 (Inc. Tax) Mach2.4 IGUS bushing for Bellcrank Add to Cart
Quick View Compare M2.4 IGUS flange bushing $6.36 (Ex. Tax) $7.00 (Inc. Tax) IGUS flange bushing (6mm ID, 8mm OD) for Mach2.4 bowsprit wand axle (For carbon upgraded parts) Used by all the Top Mach2 Sailiors at the 2017 Garda Moth Worlds Add to Cart
Quick View Compare M2.3 to 2.4 RHA Back End Conveter $186.36 (Ex. Tax) $205.00 (Inc. Tax) Includes new RHA plastic end and rod end configuration. Add to Cart
