Deck Hardware

Sort by

Quick View

Allen Ball/Knob Stoppers

$1.40 - $2.35 (Inc. Tax)
$1.27 - $2.14 (Ex. Tax)
Nylon ball stoppers in an assortment of colours - stops you losing the end of your line!  
Quick View

Clamcleat Racing Micros

$11.55 (Ex. Tax)
$12.71 (Inc. Tax)
  A small neat, lightweight, strong, alloy cleat. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines); Dinghy control lines; Kitesurfing (5th line adjustment)...
Quick View

Clamcleat Racing Micros Anodised

$17.01 (Ex. Tax)
$18.71 (Inc. Tax)
  A small neat, lightweight, strong, alloy cleat. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines); Dinghy control lines; Kitesurfing (5th line adjustment)...
Quick View

Clamcleat Tapered Pad Micro Cleat

$5.73 (Ex. Tax)
$6.30 (Inc. Tax)
Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thin sections and is supplied with every pad. For CL263, CL268, CL268AN, CL270, CL270AN, CL274, CL275,...
Quick View

Harken 10" Lock-In Alum SpeedGrip Winch Handle

$181.84 (Ex. Tax)
$200.02 (Inc. Tax)
SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high.   A (mm)254 mm B...
Quick View

Harken 10" Lock-In Alum Winch Handle

$160.04 (Ex. Tax)
$176.04 (Inc. Tax)
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the winch. Lock-in handles are easy to engage and release with a...
Quick View

Harken 22mm SB ESP 3:1 End Control Set

$237.92 (Ex. Tax)
$261.71 (Inc. Tax)
ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle bearing sheaves with sideload ball bearings.   Sheave Ø (mm)25 mm Length...
Quick View

Harken 8" Alum Winch Handle - No Lock

$116.38 (Ex. Tax)
$128.02 (Inc. Tax)
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the winch. Racers prefer plain handles because they are faster to...
Quick View

Harken 8" Lock-In Alum SpeedGrip Winch Handle

$162.45 (Ex. Tax)
$178.70 (Inc. Tax)
SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high.   A (mm)203 mm B...
Quick View

Harken 8" Lock-In Alum Winch Handle

$143.07 (Ex. Tax)
$157.38 (Inc. Tax)
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the winch. Lock-in handles are easy to engage and release with a...
Quick View

Harken 8" Lock-In Chrome Winch Handle

$169.73 (Ex. Tax)
$186.70 (Inc. Tax)
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the winch. Lock-in handles are easy to engage and release with a...
Quick View

Harken 8" Lock-In Polished Bronze Winch Handle

$169.73 (Ex. Tax)
$186.70 (Inc. Tax)
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles feature a ball bearing grip that efficiently transmits power into the winch. Lock-in handles are easy to engage and release with a...
Quick View

Harken Aluminum Double Wide Cam Cleat

$151.29 (Ex. Tax)
$166.42 (Inc. Tax)
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Height (mm)53 mm Length...
Quick View

Harken Angled Cam-Matic Riser

$19.01 (Ex. Tax)
$20.91 (Inc. Tax)
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)25 mm Length (mm)65 mm Width (mm)32 mm Weight (g)35 g Fastener spacing...
Quick View

Harken Angled Micro Cam Riser

$12.30 (Ex. Tax)
$13.53 (Inc. Tax)
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)19 mm Length (mm)48 mm Width (mm)24 mm Weight (g)21 g Fastener spacing...
Quick View

Harken Antifoul Alternative Speed Polish

$76.93 (Ex. Tax)
$84.62 (Inc. Tax)
McLube’s Antifoul Alternative is a high-gloss polish that inhibits marine growth below the waterline and keeps your hull fast and clean for weeks at a time. Citrus based and fully biodegradable, this breakthrough product is quick and easy to apply...
Quick View

Harken Ball Bearing Swivel Mainsheet Cam Base

$235.74 (Ex. Tax)
$259.31 (Inc. Tax)
Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even underhigh loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. The 144 is the standard configuration with a tall...
Quick View

Harken Bullseye Fairlead

$8.45 (Ex. Tax)
$9.30 (Inc. Tax)
Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. A (mm)32 mm B (mm)38 mm Fasteners (mm)5 RH mm   Harken Part No. 237
Quick View

Harken Cam Cleat Mast Adapter Plate

$22.68 (Ex. Tax)
$24.95 (Inc. Tax)
The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control. Height (mm)14 mm Length (mm)76 mm Width (mm)36 mm Weight (g)71 g Fastener spacing...
Quick View

Harken Cam-Matic Ball Bearing Cam Cleat

$63.30 (Ex. Tax)
$69.63 (Inc. Tax)
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Height (mm)30 mm Length...
Quick View

Harken Cam-Matic w/Wire Fairlead

$79.49 (Ex. Tax)
$87.44 (Inc. Tax)
Wire fairleads maintain a low profile while holding the line close to the cleat.Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead. Includes cam150  Includes fairlead298  Weight (g)85 g Harken Part No...
Quick View

Harken Cam-Matic w/X-treme Angle Fairlead

$90.34 (Ex. Tax)
$99.37 (Inc. Tax)
The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat.Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 375 X-Treme Angle Fairlead. Includes cam150  Includes fairlead375  Weight...
Quick View

Harken Cam-Matic Wedge Kit

$9.86 (Ex. Tax)
$10.85 (Inc. Tax)
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm)65 mm Width (mm)32 mm Weight (g)28 g Fastener spacing (mm)38 mm Fits...
Quick View

Harken Cam-Matic Wire Fairlead Kit

$15.34 (Ex. Tax)
$16.87 (Inc. Tax)
Wire fairleads maintain a low profile while holding the line close to the cleat. Height (mm)32 mm Length (mm)65 mm Width (mm)32 mm Weight (g)14 g Fastener spacing (mm)38 mm Fits cam150, 365    Harken Part No...
Quick View

Harken Carbo Cam

$49.51 (Ex. Tax)
$54.46 (Inc. Tax)
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent. Height (mm)28 mm...
Quick View

Harken Carbo Cam w/X-treme Angle Fairlead

$76.29 (Ex. Tax)
$83.92 (Inc. Tax)
The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat.Kit includes lightweight, fiber-reinforced 365 Carbo Cam and 380 X-Ttreme Angle fairlead.  Includes cam365  Includes fairlead380  Weight...
Quick View

Harken Carbo-Cam w/Wire Fairlead

$65.65 (Ex. Tax)
$72.22 (Inc. Tax)
Wire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead. Includes cam365  Includes fairlead298  Weight (g)54 g Harken Part No...
Quick View

Harken Dinghy Jib Lead Track - 18" Length

$58.65 (Ex. Tax)
$64.51 (Inc. Tax)
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.   Length (m)0.45 m Weight (g)65 g Fasteners (mm)5 FH mm Mounting hole spacing (mm)76 mm First hole (mm)34 mm ...
Quick View

Harken Dinghy Jib Lead w/Cam Port

$205.63 (Ex. Tax)
$226.19 (Inc. Tax)
These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 13 m² (140 ft²).The 452 bullseye lead has a controlled pivot angle so the cleat is always within easy...
Quick View

Harken Dinghy Jib Lead w/Cam Stbd

$205.63 (Ex. Tax)
$226.19 (Inc. Tax)
These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 13 m² (140 ft²).The 452 bullseye lead has a controlled pivot angle so the cleat is always within easy...
Quick View

Harken Dinghy Jib Lead with Bullseye

$97.60 (Ex. Tax)
$107.36 (Inc. Tax)
These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 140 ft² (13 m²).Use the 451 bullseye cars when line deflection is small Length (mm)67 mm Width...
Quick View

Harken Dinghy Jib Lead with Eyestrap

$98.06 (Ex. Tax)
$107.87 (Inc. Tax)
These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 140 ft² (13 m²).The 450 pinstop jib lead has a removable bail to attach a spring and block Length...
Quick View

Harken Eye Strap for 280 Offshore Cam

$14.14 (Ex. Tax)
$15.55 (Inc. Tax)
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)71 mm B (mm)23 mm C (mm)52 mm D (mm)22 mm E (mm)19 mm F (mm)19 mm Height...
Quick View

Harken Flat Cam-Matic Riser

$14.18 (Ex. Tax)
$15.60 (Inc. Tax)
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Length (mm)65 mm Width (mm)32 mm Weight (g)38 g Fastener...
Quick View

Harken Flat Micro Cam Riser

$7.82 (Ex. Tax)
$8.60 (Inc. Tax)
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Length (mm)48 mm Width (mm)24 mm Weight (g)14 g Fastener spacing...
Compare up to 4 items:
Clear Selection