The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Height above cam...

Wire fairleads maintain a low profile while holding the line close to the cleat. Height (mm)23 mm Length (mm)48 mm Width (mm)24 mm Weight (g)8 g Fastener spacing (mm)27 mm Fits cam468, 471 Harken Part No. 475

The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control. Height (mm)14 mm Length (mm)76 mm Width (mm)36 mm Weight (g)71 g Fastener spacing...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat without centering the line. Height above cam...

Wire fairleads maintain a low profile while holding the line close to the cleat. Height (mm)32 mm Length (mm)65 mm Width (mm)32 mm Weight (g)14 g Fastener spacing (mm)38 mm Fits cam150, 365    Harken Part No...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm)48 mm Width (mm)24 mm Weight (g)5 g Fastener spacing (mm)27 mm Fits...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)25 mm Length (mm)65 mm Width (mm)32 mm Weight (g)35 g Fastener spacing...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)28 mm Length (mm)65 mm Width (mm)32 mm Weight (g)38 g Fastener...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)19 mm Length (mm)48 mm Width (mm)24 mm Weight (g)21 g Fastener spacing...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Height (mm)16 mm Length (mm)48 mm Width (mm)24 mm Weight (g)14 g Fastener spacing...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm)85 mm Width (mm)38 mm Weight (g)43 g Fastener spacing (mm)52 mm Fits...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)71 mm B (mm)23 mm C (mm)52 mm D (mm)22 mm E (mm)19 mm F (mm)19 mm Height...

365 Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base. Height (mm)33 mm Weight (g)85 g Minimum line Ø (mm)3 mm Maximum line Ø (mm)10 mm Fastener spacing (mm) 38 / 25 mm Fasteners...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm)48 mm B (mm)10 mm C (mm)38 mm D (mm)14 mm E (mm)6 mm F (mm)11 mm Weight...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm)65 mm Width (mm)32 mm Weight (g)28 g Fastener spacing (mm)38 mm Fits...