Quick View Compare Harken Micro Wire Fairlead II $17.03 (Ex. Tax) $18.73 (Inc. Tax) Wire fairleads maintain a low profile while holding the line close to the cleat. Height (mm)23 mm Length (mm)48 mm Width (mm)24 mm Weight (g)8 g Fastener spacing (mm)27 mm... Add to Cart
Quick View Compare Harken Micro X-Treme Angle Fairlead II $40.83 (Ex. Tax) $44.91 (Inc. Tax) The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can’t recleat... Add to Cart
Quick View Compare Harken Midrange End Stop (1) $37.45 (Ex. Tax) $41.19 (Inc. Tax) Harken Midrange End Stop (1) Add to Cart
Quick View Compare Harken Midrange Stand Up Spring Was: $18.15 Now: $8.95 (Ex. Tax) Was: $19.97 Now: $9.85 (Inc. Tax) On Sale Springs support blocks on padeyes, eyestraps, bases, and traveler cars, and prevent blocks from hitting the deck. A (mm)64 mm B (mm)35 mm Weight (g)21 g Harken Part No... Add to Cart
Quick View Compare Harken Mirco Carbo Cam II $67.96 (Ex. Tax) $74.76 (Inc. Tax) Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where... Add to Cart
Quick View Compare Harken Offshore Cam Cleat $149.92 (Ex. Tax) $164.91 (Inc. Tax) Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous... Add to Cart
Quick View Compare Harken Offshore Cam Wedge Kit $16.00 (Ex. Tax) $17.60 (Inc. Tax) Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm)85 mm Width (mm)38 mm... Add to Cart
Quick View Compare Harken One Drop Ball Conditioner $36.88 (Ex. Tax) $40.57 (Inc. Tax) Only one drop of this new conditioner will repel salt, dirt and other deposits to protect, lubricate and condition the bearing surfaces. Reduced friction allows balls to roll freely and evenly,... Add to Cart
Quick View Compare Harken Pair of Micro Control Blocks (2) $102.68 (Ex. Tax) $112.95 (Inc. Tax) 16 mm control blocks spin on stainless steel balls that roll freely under high loads. Sheave Ø (mm)16 mm Length (mm)33 mm Weight (g)11 g Maximum line Ø (mm)5 mm... Add to Cart
Quick View Compare Harken Pair of Micro Control Tangs (2) $33.55 (Ex. Tax) $36.90 (Inc. Tax) Use the 2705 control tang set for 1:1 purchase (no end controls necessary). Length (mm)21 mm Weight (g)3 g Maximum working load (kg)113 kg Breaking load (kg)339 kg ... Add to Cart
Quick View Compare Harken Pawl Oil for Pawls and Springs $27.54 (Ex. Tax) $30.29 (Inc. Tax) You should service your winches at least once during the preseason. However, twice a season is best if your boat lives in salt water. If you race your boat hard, you may want to maintain your... Add to Cart
Quick View Compare Harken Reflex - Full Finger $34.65 (Ex. Tax) $38.12 (Inc. Tax) Responsive performance for active line handling. The double-thick Black Magic® palm material provides superior grip. Minimal stretch when wet, dries soft. Durable nylon spandex with rubber... Pick Options
Quick View Compare Harken Remote Switch w/Guard (76mm) $126.01 (Ex. Tax) $138.61 (Inc. Tax) Harken® offers waterproof switches for electric and hydraulic systems to operate winches, furlers, and windlasses. These simple waterproof switches operate by finger or foot. A safety cover... Add to Cart
Quick View Compare Harken Self Contained Micro Sheave $10.93 (Ex. Tax) $12.02 (Inc. Tax) Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin® with Delrin® ball bearings. They are scored for rope... Add to Cart
Quick View Compare Harken Single Micro Block $28.31 (Ex. Tax) $31.14 (Inc. Tax) Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave Ø (mm)22 mm Length... Add to Cart
Quick View Compare Harken Single Micro Block w/Becket $32.77 (Ex. Tax) $36.05 (Inc. Tax) Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave Ø (mm)22 mm Length... Add to Cart
Quick View Compare Harken Single Micro Block w/Shackle $40.93 (Ex. Tax) $45.02 (Inc. Tax) Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave Ø (mm)22 mm Length... Add to Cart
Quick View Compare Harken Single Micro Block w/Shackle & Becket $45.45 (Ex. Tax) $49.99 (Inc. Tax) Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Sheave Ø (mm)22 mm Length... Add to Cart
Quick View Compare Harken Single Speed Winch with alum/composite base, drum and top $287.02 (Ex. Tax) $315.72 (Inc. Tax) Single-speed, plain-top winches use Delrin® bearing sleeves. Delrin® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. MaterialAluminum ... Add to Cart
Quick View Compare Harken Small Boat 22mm CB Loop Car $292.66 (Ex. Tax) $321.93 (Inc. Tax) Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Loop cars matched with Carbo T2 AirBlocks® attached with high-tech line... Add to Cart
Quick View Compare Harken Small Boat 22mm HL CB Loop Car $367.80 (Ex. Tax) $404.58 (Inc. Tax) Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Loop cars matched with Carbo T2 AirBlocks® attached with high-tech line... Add to Cart
Quick View Compare Harken Small Boat CB Car w/Shackle $862.50 (Ex. Tax) $948.75 (Inc. Tax) Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Length (mm)73 mm Width (mm)57 mm Car body height... Add to Cart
Quick View Compare Harken Small Boat CB Car w/Toggle $348.11 (Ex. Tax) $382.92 (Inc. Tax) Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Length (mm)73 mm Width (mm)57 mm Car body... Add to Cart
Quick View Compare Harken Small boat CB Track Splice Link $23.44 (Ex. Tax) $25.78 (Inc. Tax) Splice links join track and keep it aligned during installation. Use with track2720, 373 Harken Part Number: 2724 Add to Cart
Quick View Compare Harken Small boat Heavy Duty End Stop Set $73.50 (Ex. Tax) $80.85 (Inc. Tax) When end controls are not used, add endstops to absorb shock loads. Fasteners (mm)5 mm Use with track2720, 373 Harken Part Number: 263 Add to Cart
Quick View Compare Harken Small boat Heavy Duty Hi-Beam End Stops (Pair) $89.60 (Ex. Tax) $98.56 (Inc. Tax) When end controls are not used, add endstops to absorb shock loads. Fasteners (mm)5 mm Use with track2721, 2725, 374 Harken Part Number: 264 Add to Cart
Quick View Compare Harken Small boat High-beam CB retrofit track w/4" hole spacing - 12' $573.12 (Ex. Tax) $630.43 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)3.66 m Weight (g)2143 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small boat High-beam CB retrofit track w/4" hole spacing - 4' $197.83 (Ex. Tax) $217.61 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.22 m Weight (g)709 g Fasteners (mm)5 FH mm Mounting... Add to Cart
Quick View Compare Harken Small boat High-beam CB retrofit track w/4" hole spacing - 6' $282.20 (Ex. Tax) $310.42 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.83 m Weight (g)1077 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Slide Bolt Track 1 $199.46 (Ex. Tax) $219.41 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Slide Bolt Track 2 $215.32 (Ex. Tax) $236.85 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Slide Bolt Track 3 $465.66 (Ex. Tax) $512.23 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.High-beam variable hole spacing track is used to span cockpits or other unsupported areas... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Track w/100mm hole spacing $149.31 (Ex. Tax) $164.24 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fasteners (mm)5 FH mm Harken Part... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Track w/100mm hole spacing 1 $186.29 (Ex. Tax) $204.92 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.2 m Weight (g)695 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Track w/100mm hole spacing 2 $211.63 (Ex. Tax) $232.79 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.5 m Weight (g)879 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Track w/100mm hole spacing 3 $240.35 (Ex. Tax) $264.38 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.8 m Weight (g)1055 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat High-beam CB Track w/100mm hole spacing 4 $540.04 (Ex. Tax) $594.04 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)3.6 m Weight (g)2110 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Jib Lead Slider $239.99 (Ex. Tax) $263.99 (Inc. Tax) Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without... Add to Cart
Quick View Compare Harken Small boat Low-beam CB retrofit track w/4" hole spacing - 12' $522.39 (Ex. Tax) $574.63 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)3.66 m Weight (g)1574 g Fasteners (mm)5... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing $81.09 (Ex. Tax) $89.20 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)0.6 m Weight (g)258 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 1 $118.27 (Ex. Tax) $130.10 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1 m Weight (g)430 g Fasteners (mm)5 FH mm Mounting... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 2 $156.34 (Ex. Tax) $171.97 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.2 m Weight (g)516 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 3 $179.41 (Ex. Tax) $197.35 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.5 m Weight (g)645 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 4 $189.93 (Ex. Tax) $208.92 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.8 m Weight (g)775 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 5 $221.06 (Ex. Tax) $243.17 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)2.1 m Weight (g)904 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 6 $281.33 (Ex. Tax) $309.46 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)2.5 m Weight (g)1077 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 7 $361.04 (Ex. Tax) $397.14 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)3 m Weight (g)1291 g Fasteners (mm)5 FH mm Mounting... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/100mm hole spacing 8 $432.23 (Ex. Tax) $475.45 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)3.6 m Weight (g)1549 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/Pin Stop Holes $103.09 (Ex. Tax) $113.40 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/Pin Stop Holes 1 $165.00 (Ex. Tax) $181.50 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1 m Weight (g)420 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/Pin Stop Holes 2 $223.98 (Ex. Tax) $246.38 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)1.5 m Weight (g)629 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Boat Low-beam CB Track w/Pin Stop Holes 3 $293.02 (Ex. Tax) $322.32 (Inc. Tax) Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m)2 m Weight (g)838 g Fasteners (mm)5 FH mm... Add to Cart
Quick View Compare Harken Small Stand-up Boot Was: $25.59 Now: $13.70 (Ex. Tax) Was: $28.15 Now: $15.07 (Inc. Tax) On Sale Made of durable, flexible PVC, stand-up boots holdblocks up without snagging lines.The 369 fits 40 mm and 57 mm Carbo and Black Magic® blocks. A (mm)51 mm B (mm)40 mm Weight (g)21... Add to Cart
Quick View Compare Harken Small Swivel Base w/Double Cam $426.74 (Ex. Tax) $469.41 (Inc. Tax) Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate... Add to Cart
Quick View Compare Harken Smallboat Hi-beam End Stops (Pair) $20.77 (Ex. Tax) $22.85 (Inc. Tax) When end controls are not used, add endstops to absorb shock loads. Fasteners (mm)5 mm Use with track2721, 2725, 374 Harken Part Number: 174 Add to Cart
Quick View Compare Harken Smallboat Hi-beam Trim Caps (Pair) $45.04 (Ex. Tax) $49.54 (Inc. Tax) When end control assemblies are used, trim caps finish track ends. Use with track2721, 2725, 374 Harken Part Number: 2723 Add to Cart
Quick View Compare Harken Smallboat Line Shedding End Stops (Pair) $26.67 (Ex. Tax) $29.34 (Inc. Tax) When end controls are not used, add endstops to absorb shock loads. Use with track2720, 373 Harken Part Number: 446 Add to Cart
Quick View Compare Harken Smallboat Low-beam End Stops (Pair) $19.13 (Ex. Tax) $21.04 (Inc. Tax) When end controls are not used, add endstops to absorb shock loads. Fasteners (mm)5 mm Use with track2720 Harken Part Number: 173 Add to Cart
Quick View Compare Harken Smallboat Low-beam Trim Caps (Pair) $37.55 (Ex. Tax) $41.30 (Inc. Tax) When end control assemblies are used, trim caps finish track ends. Use with track2720, 373 Harken Part Number: 2722 Add to Cart
Quick View Compare Harken Smallboat Pin Stop $259.53 (Ex. Tax) $285.48 (Inc. Tax) Use with 2751 Small Boat pinstop track. Length (mm)42 mm Width (mm)35 mm Height above track (mm)21 mm Weight (g)45 g Use with track2751 Harken... Add to Cart
